Collet Tube Pullers
Elliott’s collet style tube puller is designed to quickly pull tube stubs from tube sheets without damaging the tube sheet hole. Offering the gripping power of a spear with the speed and convenience of a collet.
-
Tube Size: 0.50″ to 2.50″ (12.7 – 63.5mm)
-
Type: Tube Puller
-
Application: Condensers, chillers, heat exchangers, boiler air heaters, and paper mill evaporators
-
Pulling Capacity: Up to 25 Tons
-
Pulling Stroke: 6.00″ (152.4mm)
Elliott’s Collet Style Tube Tugger was designed for fast and efficient tube removal in condensers, chiller, and other heat exchangers. With its 6 Ton pulling capacity, the Collet Style Tube Tugger automatically grips, pulls, and releases the tube in a matter of seconds.
-
Tube Size: 0.625” to 1.000” (15.9 – 25.47mm) OD
-
Type: Tube Puller
-
Application: Condensers, chillers, or heat exchangers
-
Pulling Capacity: 6 Ton
-
Stroke: 3" (76.0mm)
-
Pulling Stroke: 2.25" (57.2mm)
Suggested Articles
Do I Need Torque Control?
With the amount of rolling motors on the market, there are a lot of variables to consider. However, one of the most common questions is around torque control, setting torque, and when it’s not needed for a job.
How To Retube A Locomotive Boiler
Historically, many railroad companies used steam locomotives for transportation. Today, most steam locomotives are reserved for private rails, museums, and other charity organizations. As these systems age, they present several unique maintenance challenges that can arise due to the design and location of these units. Understanding the composition of locomotive boilers, as well as the maintenance needs, can make restoration jobs a little bit easier.
When To Retube or Replace
To get the best performance out of a vessel it’s important that it maintains necessary operating capacity. While there are several preventative maintenance procedures that can prolong the life of the vessel, eventually a decision on retubing or replacing the unit will need to be made.
Choosing The Right Tube Puller
When it comes to removing tubes, there are many different options to choose from. Hydraulic or automated pulling options can be a great way to speed up the job, reduce tube sheet damage, and improve operator ergonomics. However, before selecting a pulling package, it’s important to consider the vessel type, tube condition, and space constraints
Increase Tool Life On Tough Materials: Benefit Of Tapping Spears
In recent years, the use of exotic materials in heat exchanger tubing has become a lot more common. While these materials are great for working in tough conditions, they can have be very challenging to work with as they often require more tooling and job time. This is especially true in tube removal where pulling spears are used. Tapping spears have become an effective way to overcome many of these issues.
Boiler Tube Removal: How To Create A King Hole
With a variety of boiler tube removal methods out there, it can be difficult to determine the best approach for your application. Depending on the amount of expansion, age of the tube, and other wear factors, tubes can be extremely difficult to get out. Removing tubes through a king hole can be an easier method of removal, especially for operators with varying experience levels.